THE DIFFERENCE BETWEEN CRACK FILLING AND CRACK SEALING

Mar. 10,2020

THE DIFFERENCE BETWEEN CRACK FILLING AND CRACK SEALING

While the terms crack filling and crack sealing are often used interchangeably, there are differences between these methods of pavement crack repair. Understanding these differences will help you make the most cost-effective choice and long-lasting solution for crack treatment of your asphalt surfaces.


Crack sealing 

Crack sealing is a method in which hot sealant is applied to working cracks to prevent water intrusion. 

What are working cracks? 

Working cracks are horizontal and/or vertical movements in cracks greater than 0.1 inches.An example of working cracks is a transverse crack.

Understanding crack sealants 

Crack sealants are rubberized and have the ability to seal the crack while staying flexible with the pavement’s movement. Beneficial for active cracks that continue to extend in size and severity over time, crack sealants stop water and debris from entering the crack, protecting the longevity of the pavement.


Crack filling 

Crack filling is the placement of asphalt emulsion into non-working cracks to reduce water infiltration and to reinforce the adjacent pavement.What are non-working cracks? 

Non-working cracks are horizontal and/or vertical movements in the crack less than 0.1 inches. 

Examples of non-working cracks include longitudinal, diagonal and alligator cracks. 

In contrast to crack sealing, crack filling treats pavement that doesn’t show significant movement.


7 types of cracks 

Before you choose which method is best for treating your pavement cracks, it is critical to understand the types of cracks that can occur: 

1. Transverse cracksThe crack extends in a perpendicular fashion to the centerline or laydown direction of the pavement.Cause: thermal shifts and are the first to appear.

2. Longitudinal cracksLongitudinal cracks run parallel to the centerline or laydown direction of the pavement and appear later than transverse cracks.Cause: Poor lane join construction, pavement shrinkage, hardening of the asphalt and shifts in temperature.

3. Edge cracksEdge cracks develop between the edge of the pavement and concrete curbs.Cause: Seasonal thaw cycles that result in widening and deepening of the crack.

4. Seam cracksSeam cracks develop along joints of pavement.Cause: Poor paving procedures

5. Block cracksBlock cracks develop in square pieces and are spaced between 4 to 12 feet. They often appear at the end of the pavement life.Cause: improper construction of base courses or lack of drainage.

6. Reflective cracksCause: Changes in the movement of the sub-base, causing the surface material to crack.Correcting sub-base courses can help eliminate reflective cracks.

7. Alligator crackingAlligator cracking is a series of interconnecting cracks that are extensive, close together and resemble an alligator’s skin.Cause: Deterioration in the asphalt from repeated traffic loading.


Choosing the right method of crack repair 

When deciding whether to fill or seal a crack, the best option is to speak to a professional. They will carefully evaluate the type of crack, expected movement of the pavement and whether it is a working or non-working crack. Transverse cracks are usually the first to appear in pavement surfaces, but other types of cracks can develop at the same time.


Crack filling: Often the best option for non-working cracks with moderate to no edge deterioration. 

Crack sealing: Often best option for cracks with limited edge deterioration.

Share:

Recent Articles

All Blogs
羞羞午夜福利免费视频